The DAYTONA 3 Ton Long-Reach Low-Profile Professional Floor Jack provides extended utility for servicing lowered performance vehicles. With an extra-low profile design and extended-reach lifting arm, this jack can access confined spots regular floor jacks can’t reach. Made in the USA with premium components, the Daytona jack brings pro-level performance home.
Overview of Key Features
This Daytona jack features a low-profile design with a minimum lift height of 3-1/3 inches to clear lowered cars. The long-reach lifting arm adds an extended 14-1/2 inches of horizontal access for tight spots.
Rapid Pump® technology reaches full lift height in only 3-1/2 pumps. Dual hydraulic pistons generate fast lifting power. The jack has all-steel construction and 360-degree rear casters for easy maneuverability.
A removable lift saddle accepts accessories for increased utility. The extended horizontal reach combined with fast lift action provides unmatched access for low-clearance vehicles.
Low-Profile Minimum Height
The Daytona long-reach floor jack provides a low-profile design with an extra-low 3-1/3 inch minimum lift height. This allows the jack to fit under the jacking points of lowered performance vehicles and race cars with very tight ground clearance.
Despite the low pick-up, the jack still extends high enough to lift trucks and SUVs to a maximum height of 24-1/4 inches. This range suits all passenger vehicles:
- Lifts from 3-1/3 inches to clear super low cars
- Extends to 24-1/4 inches for pickups and 4x4s
- 6000 pound capacity for high loads
- Dual hydraulics for fast lift action
Home mechanics can confidently lift slammed custom cars then jack up lifted off-road rigs with equal convenience. The minimum low to maximum high lift range provides tremendous versatility.
Extended Reach Design
This Daytona Professional Floor Jack incorporates an extended-reach lifting arm that provides 14-1/2 inches of additional forward horizontal access. This allows the jack to reach jacking points far back under the vehicle that standard jacks can’t access.
The extra-long arm combined with the low pick-up height enables lifting areas behind recessed deep lip front spoilers, extended rocker panels, and other obstructions. Home mechanics can now jack up specialized performance vehicles in their own garage that previously required professional shop equipment.
Long-reach jacking performance allows you to lift:
- Deep behind front spoilers and air dams
- Underneath elongated rocker panels
- Behind axles and drivetrains with minimal clearance
- On lowered and modified vehicles
The extended horizontal access opens up servicing all types of low-profile performance and race vehicles at home.
Rapid Lift Hydraulics
This Daytona floor jack incorporates the Rapid Pump® hydraulic system that delivers fast lifting action with minimal pumping effort. Standard jacks use a single lifting piston requiring 8-15 pumps to reach full extension.
Dual hydraulic pistons on the Daytona model cut the pumping stroke required in half. The long-reach jack raises the lift saddle from minimum to maximum height in just 3-1/2 pumps.
The rapid lift action increases shop productivity by reducing time spent raising vehicles compared to other jacks. Less pumping also decreases physical exertion required when lifting vehicles repeatedly.
Rugged Steel Construction
This low-profile long-reach jack features heavy-duty steel construction built for strength and durability in the garage or shop. The welded steel frame maintains rigidity lifting near the full 3 ton capacity.
Reinforced lift arms resist flexing and distortion that can lead to unstable lifting. Thick steel arms retain designed geometry despite years of use and overloading abuse.
A strengthened front lifting saddle stays flat when loaded with heavy vehicles. This prevents lifting twist that can damage jacking points. The saddle withstands everyday abuse without bending.
The industrial powder coat finish resists scuffs, chips, minor impacts, and corrosion from wet shop conditions. The durable finish retains good looks despite the harshest shop treatment.
Removable Lift Saddle
The Daytona long-reach jack includes a removable universal lift saddle that provides added utility. The cradle rotates 360 degrees to orient with vehicle jacking points.
The 11-inch wide saddle surface gives stable contact both centered or at vehicle corners. Raised rubber pads protect vehicle finish from scratching or denting during lifting.
Since the saddle is removable, it can be replaced with specialized lift head adapters. For instance, a cupped axle adapter can lift vehicles by the differential. Custom saddle extensions fit unique vehicle frames.
This versatility suits the needs of professional mechanics for specialized lifting jobs. The detachable saddle maximizes the capability of this long-reach jack.
Smooth Maneuverable Operation
The Daytona long-reach floor jack provides excellent maneuverability to access tight spaces around the work area. Large rear ball bearing casters let you easily roll the jack into precise position.
Once aligned with vehicle jacking points, the rear casters lock firmly to prevent unwanted jack movement under load. This crucial feature stops the jack sliding out of place while lifting.
The 50-inch pump handle supplies ample leverage for one person to nimbly steer the jack head into confined spots. Combined with smooth rolling wheels, the extra-long handle makes positioning easy.
Weighing just over 100 pounds, the Daytona jack is relatively lightweight for a heavy-duty long-reach model. Moving and positioning the jack by hand is manageable without needing equipment assistance.
Premium Internal Components
This Daytona floor jack is designed with heavy-duty steel components on the outside and premium internals on the inside. High-quality hydraulic seals, bearings, valves, and filters give this jack outstanding durability under hard use.
The hydraulic piston seals hold pressure and retain smooth operation despite years of use. Robust bearings at pivot points prevent wear and keep the pump handle moving freely.
An integrated filter inside the reservoir captures contaminating particles that can damage the pump and valves. Periodic oil changes are recommended, but clean oil improves component longevity.
Top-grade internal parts result in reliable service life over thousands of lift cycles. This jack is built to perform like new despite daily professional shop demands.
Made in the USA Quality
Proudly engineered and built in the USA, the Daytona long-reach floor jack adheres to strict domestic manufacturing standards. The heavy-duty US-made steel construction provides unmatched strength and longevity compared to overseas built jacks.
From initial design to final assembly, the Daytona undergoes rigorous quality control testing. Each jack is individually function and safety checked prior to leaving the American Daytona factory. You get assurance the jack meets ASME professional certification.
Starting with raw American steel, the Daytona jack goes through extensive machining and fabrication processes. This results in precision components that lift, steer, and roll smoothly despite abusive service. The Daytona brand represents trusted domestic quality for US automotive shops.
Customer Reviews
With its long-reach arm, low-profile design, rapid hydraulics, and robust steel frame, the Daytona 3 Ton Long-Reach Floor Jack satisfies:
“I’m into lowering and modifying sports compacts. This is the only affordable jack I’ve found that can reach the rear jacking points on my custom Civic. The extra long arm is perfect for reaching way under my project car.”
“I upgraded from a standard floor jack to this long-reach Daytona model. It reaches much further under my Mustang GT with lip spoiler to lift the chassis safely. So glad I chose this jack.”
“I use this jack daily at our performance shop. The long arm gets under low-riding cars with ease. It lifts vehicles faster than other jacks I’ve used too. Well worth the money for heavy use.”
“This Daytona jack was a worthwhile investment over the cheap import one it replaced. The extended reach is incredible. It gets under cars that no normal jack could access. Seems very durable too.”
This uniquely capable Daytona jack earns consistent 5 star praise from home and professional mechanics alike.
Recommended Accessories
Enhance your long-reach Daytona floor jack with these handy accessories:
- Jack stands – Use stands when lifted loads to ensure safety. Quality stands prevent accidents.
- Wheel chocks – Chocks prevent inadvertent vehicle movement during jacking. Durable rubber or composite chocks withstand abuse.
- Creeper seat – A smooth rolling creeper allows mechanics to work comfortably at ground level. Choose one with padded cushions.
- LED work light – Portable LED lights can illuminate dark under-vehicle work areas. Magnetic mounts allow flexible positioning.
- Oil drain pan – An oversized drain pan with pour spout eases oil changes. Durable plastic pans resist workshop damage.
- Jack maintenance kit – Kits with replacement seals, grease, and filters simplify servicing your jack.
Relying on quality accessories makes vehicle service faster, easier, and safer. Invest in equipment that increases productivity.
Conclusion
With its uniquely extended-reach lifting arm, low-profile design, rapid lift hydraulics, and heavy-duty American steel frame, the Daytona 3 Ton Long-Reach Professional Floor Jack delivers unmatched access for lowered performance vehicles. Home mechanics can now easily service super low race cars and stanced custom vehicles in their own garage.
The extra horizontal extension, ultra-low pick-up height, and fast dual-pump lifting system provides utility well beyond standard garage floor jacks. From mini trucks to exotic sports cars, this jack can safely lift modified vehicles that typical jacks struggle with.
For car enthusiasts tackling custom lowering projects, this specialty Daytona jack saves significant dollars over pro shop equipment. The long-reach arm and Rapid Pump technology provide professional-level utility at just a fraction of the cost.
Whether you’re maintaining daily drivers or tricking out weekend race cars, the Daytona long-reach floor jack increases your productivity. Quick lift action reduces service time while robust steel materials ensure years of reliable performance.
The Daytona brand signifies advanced domestic engineering for hardcore auto enthusiasts. This long-reach jack continues that tradition with innovative design perfectly suited for slammed and unique vehicles. For unmatched utility jacking the lowest of low riders, the Daytona long-reach model is the clear choice.
