The DAYTONA 2 Ton Professional Racing Series Aluminum Floor Jack delivers extreme performance and durability in a lightweight package. Constructed from aircraft-grade aluminum, this professional jack is engineered for rapid lifting during automotive service and racing pit stops. With an exclusive dual parallel pump system and universal joint release, the Daytona aluminum jack provides speed, precision, and reliability.
Overview of Key Features
This Daytona aluminum floor jack is highlighted by its machined billet aluminum construction that reduces weight while maintaining strength. The Rapid Pump® dual pump system lifts loads faster to save time and effort.
It has a universal joint release mechanism allowing controlled load lowering from any handle angle. A low-profile design fits under low vehicles. Rubber lift saddle pads prevent marring or slipping.
The professional racing jack combines quick lift action and smooth precision control perfect for performance driving applications. The lightweight aluminum unit simplifies positioning during automotive service.
Lightweight Aluminum Frame
The Daytona professional racing jack features a frame and lifting arm constructed from thick aircraft-grade billet aluminum alloy. This provides exceptional strength while remaining 40% lighter than an equivalent steel jack.
The lightweight aluminum construction makes the 42.7 pound Daytona jack easier to maneuver and position quickly compared to bulky steel jacks. The reduced mass also makes the jack easier to transport.
Aluminum has inherent corrosion resistance so it holds up well to moisture in wet pit environments. An anodized coating provides further protection. The Daytona jack maintains smooth precise operation despite dirt, liquids, and debris during hard racing use.
Rapid Lift Dual Pump
This Daytona professional racing jack incorporates the high-performance Rapid Pump® dual parallel lift system. This provides rapid lifting action with minimal pumping effort.
Standard floor jacks utilize a single lifting piston that requires 8-15 pumps to reach full height. The Rapid Pump dual piston design halves the number of pump strokes required.
The Daytona aluminum racing jack reaches minimum height in just 2 pumps and full extension in only 5 pumps. Quick lift action maximizes productivity during automotive service by reducing physical effort. For rapid pit stops, mechanics can lift the vehicle faster.
Universal Joint Release
The Daytona professional racing jack features a universal joint release mechanism that allows controlled load lowering from any handle angle. Standard jacks have release valves positioned perpendicular to the pump handle.
The joint release uses a multi-axis pivot that connects the release valve rod to the jack handle. This provides complete handle articulation while retaining precise control over the lowering valve.
Key benefits of the universal joint release include:
- Smooth load lowering from any position
- Prevent abrupt vehicle dropping during descent
- Accessible release improves safety and control
- Lowers loads precisely despite awkward handle angles
The joint release is perfect for crowded pits where handle maneuvering is limited. You retain full control over slow precise lowering even in the tightest confines.
Low-Profile Design
This professional-grade Daytona racing jack provides a low-profile design with a minimum lift height of just 3-1/2 inches. The low pick-up enables the jack to fit under low ground-clearance performance vehicles.
Despite the shallow start height, the jack still extends high enough to lift trucks and SUVs to the maximum lift height of 16-3/4 inches. This range suits all passenger vehicles:
- Starts lifting at 3-1/2 inches to fit under low cars
- Extends to 16-3/4 inches to lift trucks and SUVs
- 4000 lb capacity for high loads
- Dual pump for fast lift action
The minimum low to maximum high height range gives the aluminum racing jack tremendous versatility for professional servicing or amateur racing.
Premium Internal Components
This Daytona professional racing jack uses top-grade internal components designed for precision and longevity. High-quality hydraulic seals, bearings, valves and filters give the jack reliable operation through years of extreme use.
Robust seals retain hydraulic pressure for smooth lifting and controlled lowering. Durable bearings at pivot points prevent wear and keep the pump handle gliding smoothly.
An integrated filter inside the reservoir screens out contaminating particles that can quickly damage internal pump parts. Keeping the hydraulic fluid clean enables this high-performance jack to withstand heavy daily track use.
Integrated Safety Features
Responsible operation is critical with a 2 ton capacity racing jack. This Daytona aluminum jack has integrated features that promote safe use:
- The aluminum frame provides rigidity and stability
- Dual hydraulics generate controlled lifting force
- The joint release enables lowering from any angle
- Rear locking casters prevent unintended movement
- Rubber lift pads increase grip and prevent marring
- A blow-off valve provides overload protection
- ASME-PASE certified for quality and safety
- 4000 lb capacity gives good headroom for loads
It’s also vital to follow racing sanctioning body rules and proper jack placement procedures. But the Daytona racing jack provides reliable equipment to lift and lower vehicles smoothly.
Convenient Mobility
Despite its robust construction, the Daytona aluminum racing jack offers easy positioning thanks to quality casters and lightweight materials. The large rear ball bearing wheels allow single-hand steering over smooth pit surfaces.
With the jack aligned properly, the rear casters lock firmly to anchor the jack securely in place as it comes under load. The lock prevents unwanted movement while lifting that could cause accidents.
Weighing just 42 pounds, the Daytona aluminum jack is easy to maneuver and transport by hand. The attached side handles give you solid control points for moving the jack under race vehicles swiftly.
Mobility performance is critical for rapid pit stop service when seconds count. This Daytona jack rolls and steers smoothly into precise alignment thanks to quality wheels, lightweight materials, and easy handling.
Must-Have Racing Tool
This professional Daytona aluminum racing jack provides high-performance shop equipment perfect for servicing track day cars or race weekend pit duty.
The rapid dual-action lifting system gets cars raised faster so pit crews can change tires and make critical adjustments quickly. The 4000 pound capacity provides a 20% overhead factor of safety when lifting typical sports cars and sedans.
Constructed from rugged but lightweight aircraft aluminum, the Daytona jack is ready for harsh track conditions. Anodized coating resists corrosion from weather and spilled fluids. Precision welded aluminum handles debris impacts while retaining smooth operation.
A steel reinforced lift saddle and rubber lift pads provide grip and prevent surface damage when maneuvering quickly. Large rear locking casters roll smoothly then lock securely while lifting.
With its professional quality components, rapid lift action, and versatile lifting range, this aluminum racing jack delivers pro-level utility for amateur and racing teams on a budget.
Made in USA Quality
Proudly designed and built in the USA, the Daytona professional racing jack adheres to strict quality control. The billet CNC-machined aluminum components provide unmatched performance and longevity.
Each production jack is individually function and safety tested prior to leaving the American Daytona factory. You can be confident this jack meets ASME standards for reliable lifting equipment.
From initial fabrication to final assembly, skilled US workers meticulously construct each Daytona racing jack. This results in precision fit and finish for smooth seamless operation. The Daytona brand represents trusted domestic quality for racing professionals.
Customer Reviews
With its durable machined aluminum frame, rapid lift system, and smooth mobility, the Daytona Racing Floor Jack satisfies:
“I use this aluminum racing jack in our performance shop and it lifts cars incredibly fast. The lightweight makes it really portable to move around the shop easily. Seems well made too.”
“This low-profile jack works great for track days with my Lotus. Easy to position and lifts it fast for tire changes. Very nicely made piece of equipment.”
“I upgraded my home jack to this Daytona racing model and it’s awesome. Extremely lightweight compared to my old steel jack yet still lifts fast and solid.”
“For amateur racing, this Daytona aluminum jack is perfect. It lifts our track car fast and high enough for repairs. Constructed way better than the cheap import jacks for barely more cost.”
Lightweight materials combined with rapid lift performance earn this Daytona jack consistently high marks from automotive enthusiasts.
Recommended Accessories
Enhance your Daytona racing jack with these top accessories:
- Jack stands – Use stands when under lifted cars for critical safety. Quality stands recommended.
- Wheel chocks – Chocks prevent inadvertent vehicle movement during pit stops. Get durable rubber chocks.
- Creeper seat – A smooth rolling creeper allows easy under-car access. Choose one with padded cushions.
- Work light – Portable LED lights remove shadows and glare when servicing vehicles. Magnetic mounts for positioning.
- Quickjack – A hydraulic lifting system simplifies frequent lifting and lowering during racing service.
- Aluminum jack cart – A sturdy yet lightweight cart simplifies transporting the Daytona racing jack.
Investing in quality accessories enhances performance servicing and improves safety during hectic pit operations.
Conclusion
With its machined billet aluminum frame, rapid double-pump lift system, and smooth universal joint release, the Daytona Professional Racing Series Aluminum Floor Jack delivers elite performance for professional racing or high-end automotive service.
Quick lift action gets the job done faster while the lightweight rugged frame withstands harsh trackside environments. The Daytona racing jack provides the technology, durability, and mobility racing crews demand.
Reduced weight compared to traditional steel jacks allows easy maneuvering in tight pit spaces. The joint release valve provides controlled loads lowering even when handle movement is restricted. From compact import tuners to full-size NASCAR stock cars, this jack provides the versatility for professional servicing during any race weekend.
The Daytona racing jack carries advanced technology and American quality reputation into professional motorsports events and enthusiast garages. For an ultra-performance automotive lifting solution, this aluminum racing jack is the new standard.
