The DAYTONA 1.5 Ton Professional Racing Series Aluminum Floor Jack delivers race-ready performance in a compact lightweight package. Constructed of aircraft-grade aluminum alloy, this professional jack is designed for rapid lifting and smooth precision handling. With an exclusive dual parallel pump system and universal joint release, the Daytona aluminum jack provides speed, control, and durability for the track or garage.
Overview of Key Features
This Daytona aluminum floor jack highlights its billet aluminum construction that reduces weight while maintaining strength. The Rapid Pump® dual pump system swiftly lifts loads with minimal pumping.
An articulating joint release enables controlled lowering from any handle angle. Rubber lift pads grip surfaces securely while avoiding marring. A low-profile design fits under low ground clearance vehicles.
The professional racing jack combines fast lift action and smooth control perfect for servicing performance vehicles. The lightweight aluminum frame allows easy one-person positioning exactly where needed.
Lightweight Aluminum Frame
The Daytona professional racing jack features a chassis and lift arm constructed from thick aircraft-grade billet aluminum. This maintains exceptional strength while reducing weight by over 50% versus an equivalent steel jack.
The ultra-light aluminum construction makes the 32 pound Daytona jack effortless to maneuver and position swiftly. Reduced mass also simplifies transportation and storage.
The aluminum has inherent corrosion resistance to withstand pit or garage environments. An anodized coating provides further protection from moisture and salty winter conditions. The Daytona jack retains smooth operation despite dirt, spills, and debris.
Rapid Lift Dual Pump Technology
This Daytona professional racing jack incorporates an advanced dual parallel pump hydraulic system for rapid lifting with minimal pumping effort. Standard floor jacks use a single piston requiring 8-15 pumps to fully extend.
The Rapid Pump dual piston design cuts the number of pumping strokes needed in half. The Daytona aluminum racing jack reaches minimum height in 2 pumps and full extension in only 5 pumps.
The fast lift action maximizes productivity servicing vehicles by reducing time spent raising them up on the jack. Less pumping also decreases physical exertion from the operator.
Universal Joint Release
The Daytona professional racing jack includes an articulated joint release mechanism allowing controlled load lowering from any handle angle. Standard jacks have release valves positioned perpendicular to the pump handle.
The joint release uses a multi-axis pivot that connects the release rod to the jack handle. This enables the handle to orient in any direction while retaining precise control over lowering.
Benefits of the universal joint release include:
- Smooth load lowering from any position
- Prevent abrupt vehicle dropping during descent
- Accessible release improves safety and control
- Lowers precisely despite awkward handle angles
The joint release excels in tight confines where handle movement is restricted. You maintain complete control over gentle lowering even in cramped conditions.
Low-Profile Design
This professional-grade Daytona racing jack features a low-profile design with a minimum lift height of 3-1/2 inches. The shallow starting height allows the jack to fit under low ground-clearance performance vehicles and sports cars.
Despite the low pick-up, the jack still extends high enough to lift trucks, SUVs, and service vehicles to its maximum lift height of 14-1/4 inches:
- Lifts from 3-1/2 inch minimum to fit under low cars
- Extends to 14-1/4 inches high to lift larger vehicles
- 3000 lb capacity for reliable lifting
- Dual pump generates rapid lift action
The minimum low to maximum high lift range gives the Daytona aluminum jack tremendous utility across passenger vehicles and light trucks.
Premium Internal Components
This Daytona professional racing jack utilizes high-grade internal components engineered for precision and durability:
- Hydraulic seals – Robust seals retain pressure for smooth operation.
- Bearings – Durable bearings prevent wear for easy pumping.
- Filter – An integrated filter keeps hydraulic fluid contaminant-free.
- Valves – Quality valves enable precise lift and lower control.
Keeping dirt and debris out of the hydraulic system enables this racing jack to provide reliable service life despite harsh racing environments. Top-notch internal parts result in smooth dependable operation race after race.
Integrated Safety Features
Careful operation is critical with a 1.5 ton capacity racing jack. The Daytona aluminum jack has integrated safety features including:
- The aluminum frame provides strength and stability
- Dual hydraulics generate controlled lift force
- The joint release allows safe lowering from any angle
- Locking rear casters prevent unintended movement
- Rubber lift pads increase grip and avoid marring
- Pressure relief valve protects from excess hydraulic force
- ASME-PASE certification ensures reliable design
- 3000 pound capacity allows 20% overhead safety factor
It remains vital to follow manufacturer jacking points and safety protocols. But the Daytona jack provides advanced technology you can trust.
Smooth Maneuverable Design
The Daytona aluminum racing jack offers excellent maneuverability around the pit or garage despite its robust metal construction. The large rear ball bearing wheels enable single-hand steering over smooth surfaces.
With the jack aligned properly, the rear casters lock securely to anchor the jack in place as it comes under load. The wheel locks prevent unwanted movement during lifting that could cause accidents.
Weighing just 32 pounds, the Daytona aluminum jack is featherlight for a professional-grade floor jack. The attached side handles provide solid control points allowing easy positioning by hand.
The smooth rolling performance paired with light weight give this Daytona jack excellent control during rapid pit lane action or garage service.
Must-Have Racing Tool
This Daytona professional aluminum racing jack delivers high-performance equipment for servicing track cars or weekend race warriors.
The rapid dual-action lifting swiftly raises vehicles so crews can swap tires and dial in suspension geometry faster. The 3000 pound capacity provides 20% overhead for stable lifting of stock racers and tuner cars.
Durable aircraft-grade aluminum withstands harsh conditions from rain to debris impacts while retaining precision control. The joint release valve enables safe lowering even in tight confines. A low-profile design slips under lowered race cars.
For amateur teams or casual enthusiasts, this Daytona jack provides professional-grade utility for servicing high-performance vehicles on a budget.
Made in USA Quality
Proudly engineered and built in America, the Daytona professional racing jack adheres to strict quality control. The CNC-machined billet aluminum components provide unmatched performance and longevity.
Each production jack undergoes individual testing and inspection prior to leaving the Daytona US facility. You can trust this jack meets ASME standards for safe lifting equipment.
From raw alloy materials to final assembly, skilled American workers meticulously construct each Daytona racing jack. This results in unmatched precision fit and finish for smooth seamless operation. The Daytona brand represents trusted domestic quality.
Customer Reviews
With its durable aluminum frame, rapid lift system, and smooth control, the Daytona Racing Floor Jack earns consistent 5 star praise:
“I use this aluminum Daytona jack in our performance shop and it lifts cars super fast. The light weight makes it really easy to wheel around too. Seems very well made.”
“Awesome jack for track days with my BRZ. Lifts it fast for tire changes and suspension tweaks. Much smoother control than my old steel jack.”
“I upgraded to this Daytona racing jack and love it. So lightweight compared to my last one but still lifts fast and solid.”
“This is a great jack for amateur racing. Lifts our Volvo race car swiftly and high enough for repairs. Way better quality than comparable jacks.”
Lightweight aluminum combines with professional build quality to provide a shop favorite.
Recommended Accessories
Enhance your Daytona racing jack with these top accessories:
- Jack stands – Use stands when underneath lifted cars for critical safety. Sturdy steel stands recommended.
- Wheel chocks – Chocks prevent vehicle movement during hectic pit action. Durable aluminum chocks are best.
- Quickjack – A hydraulic or pneumatic lifting system simplifies rapid lifting and lowering. Portable units work well.
- Creeper seat – A smooth rolling creeper allows easy under-car access. Choose one with padded cushions.
- Aluminum jack cart – A lightweight yet sturdy cart simplifies transporting the Daytona jack.
- Work light – Portable LED lights remove shadows when servicing vehicles. Magnetic mounts aid positioning.
Investing in quality accessories enhances racing servicing and improves safety in busy pits.
Conclusion
With its CNC-machined billet aluminum frame, rapid dual-pump lift system, and smooth universal joint release, the Daytona Professional Racing Series Aluminum Floor Jack delivers elite servicing capability for performance racing operations.
The incredibly lightweight yet robust aluminum frame handles harsh conditions while providing easy portability. Dual-piston lifting generates rapid elevation for quicker vehicle service. The articulated release valve enables controlled lowering even when space is confined.
Whether you’re a professional race crew or weekend bracket racer, this Daytona aluminum jack provides the technology, durability, and handling needed to gain a competitive edge.
The Daytona racing heritage is renowned for advanced engineering elevating race team performance. This professional aluminum floor jack carries that reputation with innovative design and American manufacturing expertise. For a state-of-the-art racing jack, this Daytona model sets the pace.
